- Guangzhou Doppler | PAUT Detector | Ultrasonic Probe | SAM | Automated Testing System | CT Inspection System

After two years of field testing and user feedback, the NovaScan V2 has been fully upgraded in hardware and software. It offers multiple hardware configurations with higher transmit voltage, wider bandwidth and faster sampling frequency, greatly extending its application range. The redesigned software interface is concise and easy to operate, with optimized workflow to substantially boost inspection efficiency.

Real-time 3D
Inspection Function

TFM detection
points: 1024×1024

Supports simultaneous
multi-group focusing simulation

2D Scanning and
Intelligent Analysis

Product Advantages

High-speed data acquisition and processing

128 transmit channels and up to 40 kHz pulse repetition frequency enable high‑speed, high‑precision data acquisition and real‑time ultrasonic signal processing, broadening the equipment’s application range.

Full-scenario multi-modal detection function

Supports FMC-TFM, PWI-TFM, conventional PAUT, TOFD and UT. Adaptable to laboratory and industrial field scenarios, it enables simultaneous PA/UT/TOFD/TFM inspection on one screen.

3D Imaging and Intelligent Analysis Technology

Integrates 3D matrix array and 2D TFM imaging, enabling intelligent identification of corrosion, debonding and other defects to enhance detection reliability.

Efficient Data Engine & Optimized Interaction

NovaScan V2 has built-in large-capacity storage for massive data analysis and processing. Streamlined scan presets and flexible parameter adjustment greatly boost inspection responsiveness and efficiency.

Testing Cases

Comparison of Imaging Effects Among PA, FMC - TFM, and PWI-TFM

3D TFM Imaging for Bolts

2D Corrosion Scanning

Stainless Steel Weld Inspection

Product Parameters

NOVASCAN V2 Parameter Options		Phased Array Channels	Conventional Channels
Configuration	Receive/Transmit	64/128	2/2
Configuration	Sound Speed	340–15,240 m/s	340–15,240 m/s
Pulse generator	Inspection mode	PE/PC	PE/PC/TT/TOFD
	Pulse voltage	20–120 V/10 V	100 V/200 V/400 V
	Pulse mode	Bipolar square wave	Negative square wave
	Pulse width	20–1250 ns / 2.5 ns	25–1000 ns/2.5 ns
	Pulse rise time	<10 ns	<10 ns
	PRF	40 kHz	24 kHz
	Delay	20 μs/2.5 ns	20 μs/2.5 ns
Data Acquisition	Sampling rate	200 MHz	200 MHz
	ADC resolution	16-bit	16-bit
	Focusing Type	True depth / Half-path / Projection / Arbitrary surface / Dynamic focusing	NA
	Number of Focusing Rules	1024	NA
	Detection	FW/HW+/HW-/RF	FW/HW+/HW-/RF
	Maximum Fluctuation	800%	800%
Receiver	Gain Range	0–120 dB	0–120 dB
	Bandwidth	0.3–25 MHz	0.3–25 MHz
	Receive delay	20 μs / 2.5 ns	20 μs/2.5 ns
Scanning and Display	Scan Type	Full-focus/Linear/Sector/Compound	NA
	Display Modes	A/B/S/C/FMC-TFM/PWI-TFM/3D/TopC/Strip-scan	A/B/C/Strip Chart
	Measurement Units	mm/inch	mm/inch
TCG	Number of points	16	16
	Maximum gain	40 dB	40 dB
	Maximum gain slope	40 dB/10 ns	40 dB/μs
Gate	Gates	A/B/C/I + Custom Gate
	Number of gates	Unlimited
	Gate Threshold	0–100%
Full Focus	Resolution	1024×1024
Test Report		Word, PDF, Excel
Data Storage	Storage	USB Flash Drive/SSD (Built-in) 1TB
Display	Dimensions	12.1 inches
	Resolution	1280×800 pixels
	Type	Industrial-grade TFT LCD touchscreen
I/O Ports	USB	2 USB 3.0 + 1 USB 2.0
	Ethernet	1, 1000 Mb/s
	Video Output	HDMI
	Encoder	LEMO 16-pin
	Multifunction port	LEMO 14-pin
Language		Chinese/English/Russian/French/Italian/German
Battery and Power Supply	DC Supply Voltage	15 V DC
	Battery Type	10.8V 97.2Wh lithium-ion battery (hot-swappable)
	Continuous operating time	Approx. 5 hours
Physical Specifications	Dimensions	362 mm × 254 mm × 121 mm
Physical Specifications	Weight	4.9 kg (without battery)
IP Rating		IP65

Back to List